Your One Inbox can contain thousands of inspections. Instead of scrolling, you can find exactly what you need with three tools: search, filters and sorting. They work the same on the Inspected tab and on the Scheduled tab, and you can combine them.
1. Search: when you know what you are looking for
Use search when you have a specific inspection ID or reference at hand, for example because a colleague, customer or supplier asks about one shipment.
Where: the Search field at the top right of the One Inbox, next to the New inspection button.
Click the Search field.
Type the inspection ID or a reference, such as a purchase order number (for example PO26.07800).
Press Enter.
Your search appears as a grey chip in the Filtered by bar. Click the × on the chip to clear it.
Tip: every inspection shows its ID under the date, with a small copy icon next to it. Click the icon to copy the ID, for example to share it with a colleague or with QC One support. This is the fastest way to point someone to exactly the right inspection.
2. Filters: when you want to see a group of inspections
Use filters when you are not looking for one inspection, but for a selection. For example: all rejected reports of last week, all inspections of one supplier, or everything that still needs to be done at one location today.
Where: the Filters panel on the left side of the One Inbox. Scroll down in the panel to see all filters.
Date
Shows inspections for a certain day or period: Today, Yesterday, Tomorrow, Last week, Next week, or a Custom date range with a from and to date.
Use it to: plan your day (Scheduled + Today), prepare tomorrow's work (Scheduled + Tomorrow), or review last week's results (Inspected + Last week).
Status
Where an inspection is in the process:
Waiting for planning: the inspection exists, but is not fully planned yet, for example because a date or inspector is missing.
Waiting for arrival: the inspection is planned, but the goods have not arrived yet. [Check definition]
Waiting for QC: ready to be inspected.
Waiting for release: the inspection has been done and is waiting to be checked and released.
Released: the report has been released and is visible to the principal.
Published: the report is visible to all parties. See Principal versus non-principal.
Use it to: find inspections that are stuck (for example everything still Waiting for planning), or reports that still need your review (Waiting for release).
Conclusions (Inspected tab only)
The final result of a specification inspection, such as a grade or score. The options are grouped per conclusion method, for example a three-point scale with the scores "Good", "Remark" and "Rejected". Your conclusion methods are set up under Library → Conclusion methods. See Conclusion methods.
Use it to: quickly see all reports with a negative result, for example to follow up with a supplier or to prepare a claim.
Inspection point
Where in the chain the inspection takes place, for example Arrival, Packhouse, Distribution Center or Export. Some companies use their own locations here, such as a specific warehouse.
Use it to: see only the inspections at your own location or warehouse.
Inspection type
The kind or purpose of the inspection, for example Import, Entrance control, Stock inspection or Re-inspection. The available types depend on your environment.
Use it to: separate routine checks from, for example, re-inspections or stock checks.
Shipment type
How the goods were transported: Air cargo, Containerized, Conventional, Road transport or Does not apply.
Use it to: for example see all air freight shipments, which often need to be handled faster.
Organisations
The companies involved in the inspection, such as the sender (shipper) or receiver (consignee). [Check: does this filter on sender, receiver or both?]
Use it to: see all inspections of one supplier or customer, for example to prepare a supplier evaluation.
Licensees
The QC One environment the inspection belongs to. This filter is only shown when you view all licensees. See One Inbox: viewing inspections for one or all licensees.
Categories
The product groups from the Specification Manager, for example "Avocado" or "Tomatoes". You manage them under Library → Products → Categories. The Categories column in the list shows which categories are in each inspection.
Use it to: see all inspections of one product group, for example when you are responsible for one range of products.
Products
The individual products from the Specification Manager within those categories, for example "Cherry tomatoes 250 g". You manage them under Library → Products. See Creating Products.
Use it to: zoom in on one specific article, for example when there are quality complaints about it.
Specifications
The specification used for the inspection, for example a shelf-life specification for loose tomatoes. You manage specifications under Library → Specifications. See Creating specifications.
Use it to: see all inspections done against one specification, for example after you have changed it.
Legacy products
Products from the previous (legacy) product setup, which you find under Products in the main menu. Use this filter for inspections that are not yet done with the Specification Manager. See Converting legacy products to specifications.
Categories, Products or Legacy products? If your company works with the Specification Manager, use Categories and Products. If you still work with the old product setup, use Legacy products. Do you work with both? Then check both filters.
Working with filters
You can combine as many filters as you like. Only inspections that match all selected filters are shown.
Many filters let you type to search, which is handy when there are many options.
Active filters are shown as chips in the Filtered by bar above the list. Click the × on a chip to remove one filter.
To remove all filters at once, click the clear-filter icon on the right of the Filtered by bar.
No results? Click Reset filters in the middle of the page.
3. Sorting: changing the order of the list
By default the newest inspections are shown first.
Where: the arrows next to the Date and Sender/Receiver column headers.
Click the arrows to sort by date (oldest or newest first) or alphabetically by sender/receiver.
Example: rejected avocado reports of last week
Open the Inspected tab.
Under Date, choose Last week.
Under Categories, select "Avocado".
Under Conclusions, select your negative score.





